TCH-JimE

As a side note for thoose on server 26 and 27, go Here Jim

Hi, Sorry to say this is not possible Jim

Hi Fred, First of all, welcome to the family. I would suggest you optimize before you set it up live to the world. Its not all about keywords and meta tags. Have a read through our wonderful forums here as there are some useful tips!

Is this still a problem? If so, please drop us a support ticket and we shall take a look at it for you. Its most likely due to the CPANEL update Jim

Hi, Try changing it via FTP, if that fails, drop us a support ticket and we shall do it for you Jim

Welcome back Nick! Jim

Hi Ray, Actually you posted it as a support ticket which I have now dealt with Thanks!

It sounds like a corruption. You should reinstall that part of windows and then search the MS database for similar cases Jim

Hi, The first thing is to check your motherboard to see whats the fastest processor it can take and if its still available and the cost involved. At this point you may find that the processor is either no fastest enough, no longer produced or too costly. If any of these factor in, then I suggest you look at changing your motherboard with a new chip. You can get some very decent AMD ones at present! Regardless of this, if you have the processor ready to go then: 1) Make sure you have the correct heatsink and fan. this may need to be upgraded too 2) Backup all your data 3) Turn off the machine, unplug everything apart from the power cord. Make sure the power cord is turned off at the wall though! This earths the machine against unwanted static 4) I always disconnect the hard drive at this point. 5) Open the case and remove the fan cord to the motherboard. Note where it goes 6) Unscrew or remove the fan from the heatsink. 7) Remove the heatsink. This is very very very tricky and you may need a lot of force to do so. They are normally (assuming you haven't got a slot loader) held in by two clips and need to be eased off. Its possible to push too hard at this point and crack the motherboard, damage the chip and slip and gouge/scratch the motherboard 8) When off, use hover to suck up all the dust in the heatsink 9) release the CPU from its holder. This often requires using a little lever 10) When your ready, insert the new CPU, making sure alignment is correct with pin one and make sure the lever is fully down 11) Now spread some silver paste on the CPU die, I infact have never done this yet but everyone says you need to do it. 12) Here comes the tricky bit, reapply the heatsink. Make sure you dont break, scratch, gouge the motherboard or the CPU. It needs to be a tight fit though 13) Replace fan and attach. 14) Turn on power and boot up. If all goes well, motherboard should recognize chip ok. Watch temp for a bit (possible in most bios) When ready, replug back in the hard drive, start up the machine and enjoy the new boost in power. Jim

Me too @ Rick ! I think Total Jim Hosting sounds an excellant name!

Hi, I got that email yesterday. It had the words frozen and the URL had a HTTPS:// in it but its still FAKE! Be warned people! Jim

Hi, Best thing to always do, is to make a backup copy of anything you wish to delete. Then delete it and sit back and watch. If it all goes wrong, then replace the folder, safe in the knowledge its a vital part of things. If not, welcome to the extra space! Jim

Hi, If you dont want to get your hands messy, which I strongly advise you do, then proberley stick with MS. Also look at cute site builder Jim

Hi, Just a quick thought, change: "songheader.shtml" to "songheader.htm" "anysong.html" to "anysong.shtml" Any luck? I would say that php includes would be better. Jim

Hi, Cgiemail is disabled on all servers due to potential security flaws. It can not be enabled or used. Jim

Hi, Could you explain what your exactley trying to do? and why you need to set permissions on a photo? Jim

Thanks for the heads up! Jim

Hi, Honestly the best thing to do is to type into google javascript or php and then the word examples and help and it comes up with loads of pages. Browse here too! Jim

With NS, you need to make sure all tables are filled, otherwise they collapse upon themselves. The current editions of NS are actually very good indeed if your handcoding it Remember Front Page is MS based which means it doesnt produce the best code in the world! Jim

Hi, These are frontpage extension folders. Only remove them if you dont need front page. Remove them by going to your CPANEL and uninstalling frontpage extentions Jim

Please give us your invoice number and we shall take a look for you Jim

Hi, Would you mind posting up what was wrong and how you solved it for other people to see? Thanks Jim

Hi, This is due to the CPANEL software and is not something that we have changed Jim

Hi, It should be solvable. Try putting in: Http://www.yourdomainname.com/_vti_bin/sht...tom_website.htm as an allowable access point Jim

Hi, Have a look at our TotalChoice Web Hosting tutorial on htaccess and hotlinking. Just add in the extra SWF extentsion Jim