Prisoner Posted November 3, 2002 Posted November 3, 2002 What type of servers do you use and what is the processor speed? Quote
Head Guru Posted November 3, 2002 Posted November 3, 2002 All of our servers are Intel Based Systems. All utilize We have a couple different configurations available. Intel Pentium4 1.6GHz 512MB Ram 7200 RPM IDE Hard Drives Intel Pentium4 2.0GHz 1024 MB RAM 7200 RPM Hard Drive Red Hat Linux 7.2 Cpanel 5 Our Datacenter Center utilizes ONLY top name brand hardware. The facility is centered on a Cisco™ 12008 Core Router, with Cisco™ 7200 Series Routers serving as border routers, connecting via Gigabit Ethernet to the Hewlett Packard™ Procurve™ 4108GL primary switches. Hewlett Packard™ Procurve™ managed switches comprise the power and stability of the network, operating at 100mbps switched ethernet speeds. The Network Operations Center is connected via OC192 fiber connections to Verizon™ & Commonwealth Telephone (CTSI), as well as 2GBPS+ fiber from PPL Telcom™, ***** utilizes Sprint™ & AT&T™ OC3 (155mbps) connections, as well as a MCI/Worldcom™ DS3 (45mbps) connection, with also a Cogent™ 100MBPS Metro Fast Ethernet drop. For redundancy, ***** is currently running BGP4 (border gateway routing protocol) to maintain the speed and uptime. If one backbone line goes down, it will balance the load to the other(s). If one line gets congested, it will load balance the traffic. ***** is currently negotiating with major backbone providers to open POPs (Points of Presence) in the ***** facility. This will increase speeds tremendously due to on-site peering arrangements. Such would allow fiber connections directly to major US peering points/hubs. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.