catman915 Posted December 5, 2008 Share Posted December 5, 2008 I have installed a D-Link Dir655 router and connected two PC's each having it's own BulletProof FTP server installed. I have setup the two in Virtual Server with public ports of 6000 & 6001 respectfully. I'm using "CuteFTP" for a client and would like to know what the syntax is for addressing either Server? My IP is "69.66.218.208". If I set the Pub Port to 21 everything works fine but when I use a different Pub port I can't gain access and I don't know how to include the Port number into the address in my client. I was told before I purchased the router that I could access either or both servers using this procedure. Would appreciate any assistance. Thanks Quote Link to comment Share on other sites More sharing options...
TCH-Bruce Posted December 5, 2008 Share Posted December 5, 2008 Welcome to the forums catman915 I would start by checking the D-Link web site looking for how to configure the router to forward ports. Quote Link to comment Share on other sites More sharing options...
catman915 Posted December 5, 2008 Author Share Posted December 5, 2008 Welcome to the forums catman915 I would start by checking the D-Link web site looking for how to configure the router to forward ports. The router is configured. The problem is that I don't know how to address the ftp request to a specific port. The public ports are either 6000 or 6001 in the router. I need to be able to tell the client to connect to one those ports at my IP. Quote Link to comment Share on other sites More sharing options...
OJB Posted December 5, 2008 Share Posted December 5, 2008 This may be a completely incorrect thing to say, not sure about FTP ports etc but does this not work: 69.66.218.208:6000 I know things like SSH access use that sort of syntax for ports and IP addresses. Quote Link to comment Share on other sites More sharing options...
TCH-Thomas Posted December 8, 2008 Share Posted December 8, 2008 Welcome to the forum, catman915. Quote Link to comment Share on other sites More sharing options...
jamie09 Posted September 28, 2009 Share Posted September 28, 2009 Welcome to the forums! I'm a newbie myself. Well, i don't really know much but i guess you could have it checked with your ISP. Regards, Jamie Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.